Militaria auctions
Total length with scabbard: 44 cm Without scabbard: 38.6 cm Head: 25.4 cm Handle: steel, wooden cladding fixed by two screws with nuts, latch operable; sunburst stamped on the head on the back side Rifle: stamped number 9695 XSingle-edged steel head; marking on front sill: F.B./ RADOM, reception in oval D2; on the other side: Eagle under the eagle W.P. The head has traces of grinding on the si...
Overall length: 52 cm Without scabbard: 50.5 cm Head: 37, 2 cm Width at base: 2.6 cmThe Seitengewehr 98/05 bayonet, commonly referred to as the "Leaf" (Butcher Blade), was the standard bayonet of the Prussian and German armies during the First World War. Introduced into the armament in 1905 as a successor to earlier models, it was intended primarily for Gewehr 98 Mauzer rifles. The frog is ori...
Dimensions: 54 x 43 mmSecond Republic commemorative badge of the Association of Insurgents and Warriors - Insurgent Arms Grateful Greater Poland. Two-part badge on the lower and upper arms on the reverse visible traces of soldering. Award number: 5024; on the lower shoulder stamped: (-) /19; original ribbon.
Dimensions: 20 x 11.5 x 6.5 cmCasket of patriotic character, made of wood with wood carving and marquetry. In the center the image of an eagle - superimposed - against a background of crossed lances with flags. Underneath the inscription: JUSTICE THE FOUNDATION OF THE REPUBLIC.
Artillery ammunition shell for cannon wz. 1897 - 75 mm. Markings on the bottom of the shell: production- Starachowice - 9th batch - D brass supplier, technical acceptance. On the primer, markings of elaboration in Starachowice and batch number.
Dimensions: 35 x 35 mmMedal made of bronze with original ribbon. Complete with a legitimacy card for awarding the medal. The set forming an integral whole.
Overall length: 57 cm Length of the head: 42.6 cm Width at the base: 2.4 cmMarine Seitengewehr M 1911 für die Kaiserliche Marine, bayonet for the Imperial Navy, bayonet designed for the Imperial Navy with a design that results in easy smooth wielding of the weapon, good balance. Head signed on the back at the base with a crown under which is the letter "M" ; head signed: SIMSON & Co / SUHL.
A set (left and right) of corps emblems worn on the collar feet in the coat collars or at the feathers of the caps and hats of the Podhale Rifle Regiment, introduced by the field dress regulation of the Polish Army in 1919. Emblems from the 1920s/30s minted with counterfoil. They have holes for sewing.
Material: steelPadlock of the State Armament and Ammunition Factory in Skarżysko Kamienna. The padlock has an original key. Padlock signed (photographic documentation). Key signed (photographic documentation). The signatures and numbers on the padlock and key match.
Dimensions: Length: 65.5 cm Without scabbard: 64 cm Head: 52 cmFrench bayonet wz. 1886/93 with melchior handle with extended shaft and with Polish pattern marking. The bayonet is designed for the LEBEL rifle. On the latch in the rectangle the reception beating. On the handle made of melchior stamped Polish pattern markings: WZ. 86/93 (this indicates that it was taken over for the armament of t...
Size: 58 x 56 mmTsarist cap eagle for government officials. Made in thin brass plate, reverse with counter, unsigned, no clasp:
II FIGHTER AVIATION REGIMENT - KRAKOW - ALBUM - REGIMENTAL BADGE WITH ID CARD - REGIMENTAL BADGE
949 EUR
A memorial album with photographic documentation of the late Corporal Zbigniew Molicki - who died in April 1939. Attached to the cover of the album is a non-commissioned officer's commemorative badge of the 2nd Fighter Aviation Regiment, a glider badge and silver initials Z M (from the owner's last name). Inside the album are: a card for the badge of the 2nd Fighter Aviation Regiment issued to...
Commemorative cigarette case made in 1941 at the Stalowa Wola Steelworks. The steelworks was established in 1937 and until 1939 was engaged in the production of 75 and 100 mm caliber field guns, and artillery components. In 1939 the Germans took control of the plant and it functioned under the name "Stahlwerke Braunschweig - Werk Stalowa Wola" met the strategic needs of the Third Reich. The ci...
Dating: 2nd Republic Material: gilded brass, silver, enamel Mounting: post Dimensions: 21 x 21 mmMiniature badge of the reserve non-commissioned officers' association. Two-piece badge, overlaid eagle. Enamel damaged underpainting. Nut original.
Material: aluminum Dimensions: 51 x 40 mmPolish identity mark wz. 31 on the immortelle owner's data and religion: KAT, on the reverse: PKU MAŁKINIA. Dating: period of the Second Republic of Poland
Original holster for the VIS pistol from the period of the Second Republic being on the equipment of every officer of the Polish Army until 1939. Overall condition very good, supple leather, steel knops. In the back part the carrying straps were removed followed by two notches for attaching the holster to the belt. Inside the holster imprinted pistol marks. An illegible ink stamp inside. Origi...
Steel, brass, leather wood Overall length in scabbard: 109cm without scabbard: 107cm head: 91.5cm width of the head at the base: 3cm engraved on the back: inscription partially obliterated (...) 1881 (...) Stamped on the withers: 108 1 (in an ellipse) other mintings illegible one minting cancelled with a cartridge in the form of the letter R The numbers of the saber and scabbard agree Saber un...
Dimensions: 42 x 42 mmOfficer's badge of the 5th Motor Squadron. Version with the coat of arms of Krakow in the center of the badge, on the reverse side a silver punca and an engraver's punca (IK - J. Knedler). Made in silver, enameled (enamel blemish on right shoulder); mounted on post; silver-plated brass cap.
Documents after Zbigniew Kwasniewski alias "Twardy" platoon rank. Partisan unit of the Camp Combat Squad "Chrobry 1". Member of a diversionary squad forming part of a diversionary-combat unit of the Home Army. Participant in many diversionary and combat actions. Decorated with the Cross of the Home Army, Partisan Cross. Applied for the Cross of Valor and the Army Medal. Arrested by German gend...
Dimensions: 40 x 40 mm.Mounting: poleBadge of the 4th Infantry Regiment of the Legions made at the Gontarczyk factory. Approved in 1928. Badge in the shape of a round shield surrounded by a wreath with the regiment number. The badge is made of silver-plated and oxidized tombac. On the reverse of the badge stamped number 146 On the cap: W.GONTARCZYK WARSAW HONEY 19.
Overall length: in scabbard: 95 cm without scabbard: 93 cm Head: 80 cm On the hilt signature: DRP Nickel-plated steel head, signed.Closed handle stove-gilded brass frame, decorated with oak leaf motif. The hilt is straight, the bail in the shape of a half-stud with an oak leaf motif.Shield at the hilt decorated with the Eagle of the Reich, so called Gapa - partially removed. Shank of black sto...
Polish helmet pattern 28/35 for sanitary units, popularly known as helmet pattern 28. Version with a short cap without comb. The edge of the helmet has not been rolled, trimmed with sharp edges. The helmet has 5 rivets, three rivets attaching the fascicle and 2 rivets attaching the leather belt under the fascicle. The helmet has almost 100% of the original paint preserved. There is a light den...
Material: aluminum Dimensions: 50 x 40 mmPolish identity mark wz. 31 on the immortal owner's data and denomination: KAT, on the reverse: WŁOCŁAWEK 1899.Originally the name was stamped on the present reverse (upper part) traces of punching and patting remain. Dating: period of the Second Republic
Dimensions: 15.1 x 11.8 cmThe eagle of the Polonia organizations made of thin brass sheet, beaten with counter, profiled semicircularly. On the eagle four mounting holes.
Metal can 20 cm long (so called short French) with preserved original paint with minor losses. Inside the can preserved original instructions for use of the mask with corrosion stains. Carrying straps included, original in very good condition. On the lid of the can the signature in copy pencil is written - DOMINIK. The can contains a gas mask - facepiece with a set of straps. Eyepiece undamage...
German gas mask wz.38. Interesting piece found in Malopolska, complete without any signs of interference. Manufactured after 1941, two layers of spray paint, the first green feldgrau which shows through from underneath, the second layer the typical Wehrmacht gray color commonly used at the end of the war. The facial part of the mask in very good condition with a set of straps. The mask is size...
Total length with scabbard: 40 cm without scabbard: 38 cm head: 25 cmPrussian pattern bayonet M 71/84, designed for the Mauser rifle M 71/84. Handle, head, hilt and rivets - steel; wooden facings fixed with two steel rivets. Steel head, single-edged, with a flat armor with a straight profile. Leather scabbard with steel fittings. On the head of the bayonet above the snap two receipts: on the h...
Set of brass lighters - 3 pieces, made of brass shells of different caliber. Gasoline lighters - functional. Condition according to photographic documentation.
Fully supple leather, number 98 (length) stamped at the end of the belt. Aluminum buckle at the back retained varnish, signed at the SRM clip.
Dimensions: 44.5 x 40.5 mmSilver Distinguished Service Cross made on government commission in Gontak's workshop. Ribbon fastened with a hook.
Metal hand flashlight manufactured by Elektrodyn from the period of the Second Republic of Poland, which was on the equipment of the Polish Army. Headlamp with preserved original glass. Partially preserved black varnish. Switch in the form of a button with the possibility of transmitting signals in morse alphabet and continuous light. In one place on the back of the casing, a trace of corrosio...
Dimensions: 28 x 28 mmCommemorative badge of the O.R.P. Wicher from the period of the Second Republic of Poland. Two-piece with an image of the ship. Enamel undamaged, badge mounted on post cap signed STANISŁAW RESLING WARSZAWA (secondary cap). Material: silver plated tombac, enamel
Dimensions: 61 x 43 mmSecond Polish Republic period eagle made of white metal, beaten with counter, mounted on a post. On the back signature - horseshoe with letters BM - signature of Michrowski's engraving workshop.
Dimensions: 11 cm high, 7.5 cm diameterA full unopened can of American flavored powder from the World War II period. The cans were intended for soldiers of the American Army - they were part of the food rations. After the war they were also sent to Poland as part of UNRA aid.
Origin: Germany. Period: World War IISet of medical instruments designed for ENT examinations and procedures. The tools placed in the original transport case - a metal case covered with a tarp. On the case printed inscription in German: "Ärztliche Geräte für Kehlkopf, Nase, Ohr" and the numerical designation 18-27, interpreted as the manufacturer's inventory or catalog; there is no confirma...
Caritas / Grabski Silver Cross of Merit - ribbon. Crosses made until 52 variation with shallow circle embossing on the reverse. Dimensions: 47 x 42 mm
Length of the bayonet in the scabbard: 30 cm. Length of bayonet without scabbard: 28 cm. A complete bayonet from the 1960s. Provenance: from the collection of a Szczecin collector. Weight of the bayonet in scabbard: 0.29 kg. Without scabbard: 0.22 kg Condition: good
Dimensions: Length: 136 cm When folded: 112 cmPolish bayonet training rifle that was on the equipment of the Polish Army until 1939. The rifle has a stamped signature on the butt K. T. / 3 - in a circle, below it the number 160. The spring is in working order, the leather tip is undamaged.
Length when unfolded: 31 cm When folded: 23.5 cm Blade length: 19.9 cmRare on the collector's market Italian bayonet model 1938, designed for the Mannlicher Carcano carbine. The presented bayonet is the first folding version - the blade retracts into the handle like a pocket knife, thanks to a release button. Efficient folding mechanism, preserved original wooden handle facings fixed with scre...
Made between 1944 and 1952 in Warsaw by the State Mint.Piece cut. Ribbon fastened with a hook-and-loop fastener (individual solution). Dimensions: 47 x 42 mm
A set of blank AK ID cards. Legitimation of the commemorative badge: Soldiers of the National Military Organization of the NATIONAL ARMIA KRAJOWA. Legitimation of awarding badge of honor for meritorious service to the World Association of Home Army Soldiers LUBLIN District.
Prussian badge for wounds received in battle during the Great War - black. Badge minted with counter, mounted on a vertical, movable, locking pin at the bottom. Dimensions: 43 x 48 mm
Dimensions: 41 x 28 mmEagle made by Jablonski of Poznan. The eagle comes from a batch of eagles found in a basement in Poznan.
Seal piston of the CURRENT SHOOTING BRACTION IN WOLSZTYN. Founded in 1658. Material: wood, rubber, brass Stamp diameter: 47 mm
The epaulettes of a major of the Polish Legions so called "whisker". Material: bouillon in the color of old silver (silver plated). Stiffening cardboard covered with red cloth. Dimensions: 11.5 x 7.5 cm Dating: 1914 - 1918
Dimensions: 12.5 x 6.8 cm Dating: 1914 - 1918The epaulet of an officer of the Polish Legions, the so-called "whisker". Material: Silver colored gallon (silver plated) interspersed with yellow and black thread. Stiffening cardboard covered with red cloth.
German officer's belt buckle Brandenburg. There is a slight bend in the lower part.
Polish army canteen wz. 31 signature on the neck światowid 1934 in large part preserved original paint in khaki color. At the base there is a dent and a hole. At the canteen there is partially preserved aluminum chain to the cork (cork is missing) moreover at the neck there is a leather strap with a Polish snap hook.
Dimensions: total length 51.7 cm; without scabbard 50 cm; head: 36.5 cmGerman bayonet s 9805 accepted into service during World War I, after the Great War this particular piece was taken over and adapted for the Polish army. Steel wood. The bayonet has original wood facings, fireguard, mounting with two screws, case latch, on the head Polish beating W. Z. 98/05 On the hilt beaten number 1349. ...
Overall length: in scabbard: 96 cm without scabbard: 95 cm head: 82 cm width of the head at the base: 2 cm On the hilt intestine signature: GES. GESCH Nickel-plated steel head, signed: Eickhorn SolingenClosed handle stove-gilded brass frame, decorated with oak leaf motif. The hilt is straight, the bail in the shape of a half-stud with an oak leaf motif.Shield at the hilt decorated with the Eag...
Polish spurs wz. 31 designed for riding weapons made in A. Mann's factory in 1936. Steel spurs on the inside of the signature WZ 31 / A. MANN. 1936. movable wheels.
PolandPoland under partition Eagle mounted with two rings white metal, 27.2 x 34.7 mm, 6.16 g, broken rings, dark patina
Length: 28 cmLeather scabbard with steel fittings. The upper and lower hardware of the scabbard has a military technical receipt. Stiff leather damaged in the back part on the right side. State of preservation consistent with photographic documentation.
Diameter: 27.5 mmCap from Wyszomirski's workshop for the badge.
Dating: ca. 1934-1936/37Rarer aluminum version of the M 34 helmet from the period of the Third Reich, used by firefighters, air defense and police. Black lacquered helmet - partially stripped of paint in the helmet, holes for fixing the comb factory blanked. The facepiece is attached with 4 rivets - one rivet is missing. The facepiece has partially damaged lobe ends. On the cushion two ink sta...
Overall length : 83 cm saber alone 82.5 cm head: 68Scabbard of an officer of the Austro-Hungarian Navy. Handle covered with stingray leather, with triple brass braid. Full holster, decorated with the image of an eagle and sea sirens. On the head (pigtail) a representation of the face and harpoon of Poseidon. At the base of the head the manufacturer's punch "Weyer" (probably Weyersberg, Kirschb...
Dimensions: 61 x 41 mmEagle pattern 19 signed by the manufacturer - Treasurer & Fiszbein. Made of white metal (alpaca). Bits with counter mounted on the post. The post is heavily shortened.
Military eagle model 19 Material: silver plated brass Mounting: post Technique: embossed with counter No cap
